CRG NISSAN NAVARA NP300  PARTS

We currently have an est 4 - 6 week order time from PWR.

Extra delays may be experienced due to on going COVID issues and border restrictions.

Nissan Navara NP300 Intercooler Deal $1900*

(Racer Series Core + $410)

FITTING / POSTAGE EXTRA

LIMITED STOCK

Nissan Navara NP300 Hot Pipe $420

Single Turbo Hot Pipe $ Call for PRICE

FITTING / POSTAGE EXTRA

Nissan Navara NP300 Intercooler Relocation Kit ONLY $1300

FITTING / POSTAGE EXTRA

LIMITED STOCK

Nissan Navara NP300 Throttle Body Pipe $370

(WITH SENSOR BOLT AND OEM BRACKET)

FITTING / POSTAGE EXTRA

Nissan Navara NP300 Intercooler Specs

CRG Custom Nissan Navara NP300 Intercooler kit (relocation kit) is made of the highest quality parts for a budget priced Kit. PWR Custom design Intercooler core made specificly for CRG, CNC machined Brackets and fittings to work with the factory connections. Is designed to fit inside factory bumper bar, all aftermarket bull bars that we have tested with and will fit with the CRG Winch cradle. Dyno tested time after time showing intake air temperatures with an average maximum of 15 degrees over ambient and very fast return to ambient rate. Compared it to a factory Nissan Navara NP300 intercooler we can see over 100 degree intake temps and horrendous heat soak. Suits non and body lifted cars.

Nissan Navara NP300 Throttle Body Pipe Specs

CRG Nissan Navara NP300 Throttle Body pipe size 2.5" (63.5mm couldn’t make it bigger if you tried) while retaining factory bracket and IAT (inlet air temp) sensor boss that has a locking bolt (originally designed by CRG) to ensure the sensor is locked in for good. CRG’s leading designed CNC transition fitting is second to none and will minimise turbulence leading into the throttle body due to the correct degree of angle to maintain velocity and undisturbed flow path

Like all our work, this is guaranteed not to leak or have that nasty oem plastic weld sensor blow out.

Nissan Navara NP300 Hot Pipe Specs

CRG Nissan Navara NP300 Hot Pipe is a UNIVERSAL series hot pipe and dual O Ring designed, CNC fittings that will eliminate the all too dreaded common Nissan Navara NP300 hot pipe leak. Once again CRG are leading the way with retaining factory Nissan Navara NP300 OEM fittings.

NISSAN NAVARA NP300 REAR CHASSIS BRACE

Other makes and models available 

$ Call for PRICE

Late model 4wd’s are also particularly prone to bent rear chassis’, partly due to the chassis size and thickness and the remarkably high advertised ‘rated’ towing and load capacities. Towing and carrying loads that are not ideally distributed can accelerate cracking and failure, which is made even worse when done over rough or rugged terrain.

Overloaded vehicles are dangerous and unroadworthy, heavy duty suspensions and load assist airbags will not solve the problem of overloading. 

The Superior Engineering range of Weld-on chassis braces, dramatically increase the sectional strength of the chassis in key critical areas. These braces are currently available for a range of vehicles such as – Toyota Hilux Vigo & Revo, Nissan Navara D40 & NP300, Ford Ranger PX2/ Mazda BT50, Mitsubishi ML/MN & MQ Triton, Holden Colorado / Isuzu D-Max, Toyota Landcruiser 79 and many more. 

Superior Engineering has NCOP Engineering ‘Design Approval’ on all of their chassis strengthening plate kits.

Once completed all vehicles are fitted with a mod plate under the NCOP VSB light-vehicle code.

Weld on brace kits are often a great alternative where some preventative measures are being added to a vehicle planning for big loads.

 

PLEASE NOTE: These braces do not increase the load or towing capacity of the vehicle.

NISSAN NAVARA NP300 DPF BACK EXHAUST 

Other makes and models available 

$ Call for PRICE

1/3

CRG CUSTOM 4MM RAW STEEL 

NISSAN NAVARA NP300 BASH PLATE SET 

$450

Powder Coating Extra

Order time 3 - 6 weeks

CRG CUSTOM NISSAN NAVARA NP300

WINCH CRADLE

Supply & Fit Cradle $1500

Made to order lead time 4 - 6 weeks

(Requires test fit pre final welding then final fit minimum 3 days later)

Suits Factory Front Bumper ONLY Shipping not available

1/5

© 2021 CRG Turbo Manifolds.

All rights reserved