CRG NISSAN NAVARA NP300  PARTS

PWR Advance Cooling Technology

We currently have an est 12 - 14 week order time from PWR.

Available for ALL series Nissan Navara NP300 including the NEW 2021 Nissan Navara D23 Facelift.

Nissan Navara NP300 Racer series Intercooler, Nissan Navara NP300 Hot Pipe / Nissan Navara NP300 Throttle Body

BACKORDER

Nissan Navara NP300 Intercooler Kit Deal $1950

Save $250 over buying individually

(INCLUDES HOT PIPE AND THROTTLE PIPE)

Racer Series Core Upgrade Extra $450

RX Single Turbo Intercooler Kit Also Available

FITTING / POSTAGE EXTRA

Nissan Navara NP300 Hot Pipe

10-14 Day Order Time 

Nissan Navara NP300 Hot Pipe $450

Includes new seals for Both ends

(SERIES 1-5 COMPATIBLE WITH OEM EARTH FITTING)

RX Single Turbo Hot Pipe $270

FITTING / POSTAGE EXTRA

Nissan Navara NP300 Street Series cooler kit.jpg

BACKORDER

Nissan Navara NP300 Intercooler Relocation Kit ONLY $1350

(HOT PIPE / THROTTLE PIPE NOT INCLUDED)

FITTING / POSTAGE EXTRA

Nissan Navara NP300 Throttle Body Pipe

10-14 Day Order Time

Nissan Navara NP300 Throttle Body Pipe $400

(WITH SENSOR BOLT AND OEM BRACKET)

FITTING / POSTAGE EXTRA

 

Nissan Navara NP300 Throttle Body Pipe Specs

CRG Nissan Navara NP300 Throttle Body pipe size 2.5" (63.5 mm couldn’t make it bigger if you tried) while retaining factory bracket and IAT (inlet air temp) sensor boss that has a locking bolt (originally designed by CRG) to ensure the sensor is locked in for good. Nissan factory throttle pipe is plastic and when it fails it will put you on a tow truck unless you have cables ties and tape to try and make a dodgy temporary fit to hold the sensor in. CRG’s leading design CNC transition fitting is second to none and will minimise turbulence leading into the throttle body due to the correct degree of angle to maintain velocity and undisturbed flow path.

Like all our work, this is guaranteed not to leak or have that nasty oem plastic weld sensor blow out.

Nissan Navara NP300 Hot Pipe Specs

CRG Nissan Navara NP300 Hot Pipe is a UNIVERSAL series hot pipe and dual O Ring designed, CNC fittings that will eliminate the all too dreaded common Nissan Navara NP300 hot pipe leak. Once again CRG are leading the way with retaining factory Nissan Navara NP300 OEM fittings.

Nissan Navara NP300 Intercooler Specs

CRG Custom Nissan Navara NP300 Intercooler kit is made of the highest quality parts for a budget priced Kit. PWR Custom design Intercooler core made specifically for CRG, Chris worked with PWR Australia to set a custom size intercooler core with custom end tanks that were specific to suit the application to maximise the size of the core and airflow through the grill, with one major difference to any other kit, it was designed for CRG only. CNC machined Brackets and fittings to work with the factory connections. It is designed to fit inside factory bumper bar, most aftermarket bull bars that we have tested and will fit with the CRG Winch cradle. Dyno tested time after time showing intake air temperatures with an average maximum of 15 degrees over ambient and very fast return to ambient rate. Compared it to a factory Nissan Navara NP300 intercooler we can see over 100 degree intake temps and horrendous heat soak. Suits non and body lifted cars.

What is the difference between the PWR Aero 2 core & the PWR Racer Series core?

The PWR Racer Series core is statistically up to 60% lighter and 8% more efficient due to PWR's extruded light weight tube design. This helps lower temps even quicker again especially in low range driving start stop, eliminating the need for fans and fancy gimmicks. Regardless of which intercooler you choose, fans are not need with either one of our Nissan Navara NP300 intercooler kits. 

NISSAN NAVARA NP300 REAR CHASSIS BRACE

Other makes and models available 

From $205

FITTING / POSTAGE EXTRA

Late model 4wd’s are also particularly prone to bent rear chassis’, partly due to the chassis size and thickness and the remarkably high advertised ‘rated’ towing and load capacities. Towing and carrying loads that are not ideally distributed can accelerate cracking and failure, which is made even worse when done over rough or rugged terrain.

Overloaded vehicles are dangerous and unroadworthy, heavy duty suspensions and load assist airbags will not solve the problem of overloading. 

The Superior Engineering range of Weld-on chassis braces, dramatically increase the sectional strength of the chassis in key critical areas. These braces are currently available for a range of vehicles such as – Toyota Hilux Vigo & Revo, Nissan Navara D40 & NP300, Ford Ranger PX2/ Mazda BT50, Mitsubishi ML/MN & MQ Triton, Holden Colorado / Isuzu D-Max, Toyota Landcruiser 79 and many more. 

Superior Engineering has NCOP Engineering ‘Design Approval’ on all of their chassis strengthening plate kits.

Once completed all vehicles are fitted with a mod plate under the NCOP VSB light-vehicle code.

Weld on brace kits are often a great alternative where some preventative measures are being added to a vehicle planning for big loads.

 

PLEASE NOTE: These braces do not increase the load or towing capacity of the vehicle.

Isuzu DMAX 2021 Exhaust System

NISSAN NAVARA NP300

DPF BACK EXHAUST SYSTEMS

Other makes and models available see main menu

1/3

Nissan Navara NP300 DPF Back up over the diff to the back with Muffler $1150

No muffler $900

Custom Made to Order

FITTING / POSTAGE EXTRA

1/3

Nissan Navara NP300 3" DPF Back Diff Dumped Lobster Tip

$550 add $150 for resonator

3.5" DPF Back Diff Dumped Lobster Tip 

$600 add $150 for resonator

Please let us know which series you have

Custom Made to Order

FITTING / POSTAGE EXTRA

CRG CUSTOM 4MM RAW STEEL 

NISSAN NAVARA NP300 BASH PLATE SET 

From $450

Powder Coating Extra

Made to Order Lead time 3-6 Weeks

CRG Nissan Navara NP300 Bash Plate 4mm

CRG NISSAN NAVARA NP300 D23
HIDDEN WINCH CRADLE

Series 1 - 4 $950 RAW
(Fitting, Powder Coating extra)
Series 5 $750 RAW
(Fitting, Powder Coating extra)

Made to order lead time 3 - 6 weeks
(Requires test fit for series 1 - 4  pre final welding then final fit minimum 7 days later) 
(Winch not included)
Suits Factory Front Bumper ONLY 

1/8